1ml 2ml 5ml Medical Disposable Plastic Syringe with Needle
Product Name: Disposable Sterile Syringe with Needle
Model specifications: Syringe models are 1ml, 2ml, 5ml, 10ml, 20ml, 50ml, 60ml;
With needle models have 0.45,0.5,0.6,0.7,0.8,0.9,1.2;
Main structure: Mainly by the cylinder, core rod, banana piston and injection how the composition.
Product performance: Ethylene oxide sterilization, sterile, non-heat source, mainly made of polypropylene, natural rubber, stainless steel and other materials,
Use: for pumping liquid or liquid immediately after the injection /
Usage: 1, check the small package is damaged, the protective cover is off, whether there is foreign body, which shall not be used:
2, tear open the small package, remove the syringe, tighten the needle;
3, according to conventional operation, remove the protective cover, extract the liquid, the needle up to exclude liquid bubbles, you can use.
Contraindications, precautions, warnings and tips
1, This product is sterile, no heat
2, sterilized by ethylene oxide, valid for three years, pay attention to the expiry date before use, extended expiration
3, small package damaged, there are foreign objects or protective sleeve off, prohibited the use of g
4, only for one-time use, destroyed after use
5, does not apply to insulin injection and drug instructions have been marked on the use of polypropylene, natural rubber injection equipment;
6, the product contains natural rubber, disabled on natural rubber allergy;
7, this product may not be used together with Trimerization Hexanal
8, the use of products must comply with the relevant medical practices and relevant laws and regulations, limited to trained medical staff or under the guidance of medical staff
9, after use, break the mandrel, the equipment will be collected centrally, the recovery of the needle alone, should pay attention to the acupuncture injury handling, handling conditions should be handled gently, may not be discarded or dropped, or may cause the product Damage: This product should be stored in the relative humidity of not more than 80%, non-corrosive gases, dry, well-ventilated, clean environment.